Free text
Enter a text and click the Place text button. Click at the desired location on the stencil to place the text. The Clear free text button may be used to remove all free texts.
Frame text
If there is text defined in the stencil frame, Move and Delete buttons may be used to move or delete text from the stencil.
Mark objects as text
If the paste mask data includes text, it should be selected and marked as text. Text is etched into the stencil rather than being cut all the way through.
Choose a layer and click the Mark button (so that it is down) and then select the text objects. All highlighted objects will be treated as text when the production data is generated. In the same manner, use the Unmark button to unmark text objects.
Product identification
By default the stencils are given the same name, article number and description as the PCB product on which they are based, but these may be modified, if desired.
