Typically, a price list is based on a spreadsheet received from the supplier. The spreadsheet for the Demo price list would look something like this:
| 2 Layer | 0-3 m² | 3-10m² | 10-30m² | 30-50m² | 50-100m² | > 100m² |
|---|---|---|---|---|---|---|
| 8 | 108.87 | |||||
| 9 | 96.54 | 95.20 | 92.52 | |||
| 10 | 86.71 | 85.50 | 83.09 | 81.89 | ||
| 11 | 78.67 | 77.58 | 75.40 | 74.30 | 73.21 | 72.12 |
| 12 | 72.00 | 71.00 | 69.00 | 68.00 | 67.00 | 66.00 |
| 4 Layer | 0-3 m² | 3-10m² | 10-30m² | 30-50m² | 50-100m² | > 100m² |
|---|---|---|---|---|---|---|
| 10 | 166.23 | |||||
| 11 | 147.87 | 146.51 | 143.84 | |||
| 12 | 132.89 | 131.69 | 129.27 | 81.89 | ||
| 13 | 120.46 | 119.36 | 117.17 | 74.30 | 73.21 | 72.12 |
| 14 | 110.00 | 109.00 | 107.00 | 68.00 | 67.00 | 66.00 |
| 6 Layer | 0-3 m² | 3-10m² | 10-30m² | 30-50m² | 50-100m² | > 100m² |
|---|---|---|---|---|---|---|
| 12 | 241.67 | |||||
| 13 | 215.46 | 208.73 | 204.69 | |||
| 14 | 193.73 | 187.68 | 184.05 | 182.84 | ||
| 15 | 175.48 | 170.00 | 166.71 | 165.61 | 164.51 | 163.42 |
| 16 | 160.00 | 155.00 | 152.00 | 151.00 | 150.00 | 149.00 |
| Layers | Start cost | Min order value | Max board size | Tg=150 | Tg=170 |
|---|---|---|---|---|---|
| 2L | 100.00 | 100.00 | 600 x 500 mm, 0.30 m² | 10% | 18% |
| 4L | 200.00 | 200.00 | 580 x 500 mm, 0.29 m² | 9% | 16% |
| 6L | 250.00 | 250.00 | 580 x 483 mm, 0.28 m² | 9% | 16% |
| Thickness | $/m² | Cu thickness | $/layer pair/m² | $/m² | |||
|---|---|---|---|---|---|---|---|
| 0.4 mm | -5.00 | 18 µm | 0 | HAL/LF-HAL/OSP | 0 | ||
| 0.6 mm | -4.00 | 35 µm | 0 | Immersion Gold (ENIG) | 18.00 | ||
| 0.8 mm | -3.00 | 70 µm | 27.00 | Immersion Tin or Silver | 10.00 | ||
| 1.0 mm | -3.00 | 105 µm | 54.00 | Non-standard color | 5.00 | ||
| 1.2 mm | -2.00 | 140 µm | by quote | Peelable mask | 5.00 | ||
| 1.6 mm | 0 | Carbon print | 5.00 | ||||
| 2.0 mm | +15.00 | Rout diameter < 1.5mm | 10% | ||||
| 2.4 mm | +21.00 | No X-out | 2% |
Standard FR-4 1.6mm, Tg=135, 2x green/blue/black/red solder mask, 1x/2x white legend. Minimum track/clearance 0.125 mm, minimum finished hole 0.15 mm, minimum rout dia. 0.6mm.
