Choose Configure|Options to modify the program configuration.
Default import folder and Default Export folder specify the starting folder for the File|Add files and File|Save to local disk commands.
The Default values settings determine the surface finish, solder mask color, legend color and outer/inner contour cutter diameter when importing a board.
The Default values for prototypes settings determine the surface finish, solder mask color, legend color and outer/inner contour cutter diameter used by the Actions|Make prototype menu command.
The Warn if estimated minimum features less than settings may be used to specify a value for minimum track/clearance and minimum annular ring. If the minimum feature estimator finds a value less than the specified minimum, then a warning message will be generated when publishing.
Autolink state at startup specifies whether or not autolinking is activated when the module is opened.
The Run the File|New command option runs the File|New command when the module opens.
The Disable estimating minimum feature sizes option prevents estimation of minimum feature sizes. This may be useful if your CAD system generates larger objects by drawing them with many small, overlapping lines, thereby giving consistently incorrect estimates. When estimation is disabled, you must always enter the minimum feature size values before publishing.
The Show title block editor when creating stackup drawing option determines whether or not the editor will be displayed prior to creating a drawing. If you have previously selected Do not show this editor again, then this option allows you to re-enable the editor.
