Test pins are available with a variety of different heads, depending on the type of pad, solder joint or component pin they are to make contact with.
The desired head must be specified for each test point. The jig and fixture cradle are supplied fully assembled, with pins inserted into receptacles, which are soldered to the TIB.
The most commonly used pin heads are:
As shown, it is important to choose a pin head suitable for contact with the test point on the PCBA.
Only types PL75/RL75, PA100/R100 are supported in the SPRINT jig.
A variety of test pins are available for purchase in the Test accessories folder of the Product browser.
